Aimed in the main at social and wedding photographers, the S3 Pro is, as you might expect, a camera replete with professional specification features. It replaces the old S2 Pro, and includes up 1/4000sec shutter speed, Nikon F lens mount compatibility and both hot shoe and separate flash synch terminal for studio flash.
Key among the new model's spec is the SuperCCD SR II sensor, a unique-to-Fuji chip that houses two types of photo diode to capture light. Fuji's S-pixels record ‘normal’ light values while R-pixels capture high frequencies of light (brighter/whiter) subjects, offering an image capture quality analogous to colour film. In fact, the sensor uses as its basis a silver halide-like grain structure to its pixels to provide this effect.
The CCD-RAW mode offers the best use of the dual pixel configuration since the in-camera processing in other modes mysteriously processes away some vital, high-key information.
This seems strange indeed, given it is the camera's main selling point, and vital to getting the most detail from subjects such as a bride's wedding dress.
Sensitivity to light runs from ISO 100, 160 and 200 through ISO 400, 800 and 1600. Colour embedding is possible (Adobe RGB) and allows for improved colour gamut making the most of the SR II sensor system. The camera also has a superbly fast start up time at less than one second and this allows for faster reactions to quickly changing photo environments. But, because you can elect to shoot with just the S-pixels, or the dual ‘S’ and ‘R’-pixels together, it means you’ll get faster response with the former or more detail in highlights with latter - but a slightly slower response time.
So let’s have a look at that sensor in more detail. How does it work? Well, Fuji has employed an adaptation of its previous 6MP (12MP file size) SuperCCD SR technology, where each pixel had two photo diode locations: one for ‘standard’ sensitivity (the ‘S’ photo diode site) and one, smaller, photo diode (the ‘R’ photo diode site) for sensing a wider dynamic range, such as the subtle variations of whites on a bride’s wedding dress.
The new SuperCCD SR II sensor is the same size, and has the same octagonal pixel shape as its predecessor, it has both the ‘S’ and the ‘R’ photo diode locations, but now split onto separate but adjacent pixels (making the camera a ‘true’ 6MP + 6MP model says Fuji).
Splitting them onto discreet pixel locations means improvements in signal-to-noise ratio and provides a total of 6.49MP x 6.49MP (12.9MP) resolution with 12.1MP effective pixels. You can select between the two sets of pixels by either using the ‘S’ pixels on their own, or combining them with the ‘R’ pixels when that greater dynamic range is required.
Because this is a body based on a Nikon camera, the S3 is able to use all of Nikon’s system accessories and lenses. It handles as well as any Nikon D-SLR, although it does feel very slightly clunkier to use until you familiarise yourself with it fully.
The S3 has USB 2.0 and FireWire connectivity and while the single battery-type (four AA-cells) solution is a better solution, it still did not last very long. Good quality rechargeable batteries are a must. The camera has better processing algorithms over its S2 sibling, and further recommends itself with that new sensor for improved dynamic range, improved tonal capabilities and better colour balance, combined with the less image noise and improved picture quality.